PTZ Network Dome Camera DZ4010-YY/HS/HD

The high-resolution full high-definition Cam_inPIX® colour dome camera DDZ4010-YY/HS/HD with 10x optical zoom is available in different mounting variants (in-ceiling, surface, weather-proof).
1/3″ full high-definition CMOS sensor with Cam_inPIX® technology
Pure Digital Signal Processing
High-speed PTZ dome
10x optical zoom
12x digital zoom
ICR1) function for day/night switching
Comprehensive set of image optimization functions like AWB, AGC, BLC and extended slow shutter
Auto-focus with manual override
Digital noise reduction
Resolution: SD, HD (720p, 1080i, 1080p)
Frame rate up to 60 fps2)
Video compression: MJPEG, H.264
Simultaneous multi-streaming with independently adjustable resolutions, frame and bit rate of each stream
SmartZoom functionality
Motion detection with selectable sensitivity
Alarm notification via e-mail and FTP image upload3)
Bidirectional audio (intercom)
Local video memory (USB/SD port)3)
64 MB RAM video buffer
High-performance Pan/Tilt/Zoom mechanism
248 programmable preset positions, 16 programmable tours
Power supply: PoE+ or 24/28V AC
Three mounting appliances with integrated IP I/O interface available: in-ceiling, surface and weather-proof variant
Easy and quick installation
ONVIF compliant
DIN EN 50130-4 compliant

Technical specifications
Sensor 1/3″ full high-definition CMOS sensor with Cam_inPIX® technology
Signal processing Digital Signal Processing
Image capture Interlaced / progressive
Transfer format Progressive (full image)
Image resolution Up to 1920 x 1080 (Full HD, native resolution)
B/W and colour mode Automatic / manual
Day/Night functionality Mechanical ICR function
Light sensitivity At F1.8, 30 IRE: 2 lux (ICR ON: 0.2 lux)
Zoom Optical: 10x, digital: 12x
Focus Automatic, one push, manual
Flip function Yes
Shutter speed 1/2 s to 1/10000 s (in 21 steps)
Signal to noise ratio (SNR) > 50 dB
Digital noise reduction (DNR) On/Off
Brightness adjustment (ALC/AE) Automatic / manual
Backlight compensation (BLC) On/Off
Automatic gain control (AGC) Automatic / manual (-3 to +18 dB in 8 steps)
Gamma correction Automatic / manual
Adjustable white balance AWB, MWB, One push WB, Indoor, Outdoor
AE presets 6 presets
Privacy zones 8x (block, video off, mosaic)
Configuration Via PView 7, web browser
Languages English, German, French, Spanish, Hungarian
Motion detection (VMD) With selectable sensitivity
Alarm notification Via e-mail and FTP image upload
SmartZoom Yes
Pan / Tilt 360° endless / 0° – 180°
Variable speed Pan: 120°/s, tilt: 120°/s (turbo: 420°/s)
Preset speed Pan: 420°/s, tilt: 420°/s (+/- 0,1°)
Programmable preset positions 248
Programmable tours 16 (8 tours, 8 patterns)
Programmable scans 16 (including diagonal scans) / 1 auto pan (360° continuous panning)
Lens specifications
Type F1.8 – F2.1 / 5.1 – 51 mm
Iris control DC auto iris
Horizontal angle of view 50° (wide angle) – 5.4° (tele)
Format and coding
Video/audio compression H.264, MJPEG / G.711, MPEG-1 Layer 2
HD standards SMPTE 296M, SMPTE 274M
Frame rate Up to 60 fps (depending on resolution)
Video/audio bit rate Up to 8 Mbps (6 Mbps typical) / up to 384 kbps
Resolution SD, HD (720p, 1080i, 1080p)
Transmission methods Unicast, Multicast
Video streaming Simultaneous multi-streaming (H.264 and MJPEG)
with independently adjustable resolutions, frame and bit rates of each stream
Multi-streaming frame rate Up to 30 fps with maximal resolution
Audio inputs/outputs (stereo) 1x Line IN / 1x Line OUT (3.5 mm phone jack)
Ethernet 1 x RJ45, 10BASE-T-/100BASE-TX-PoE
Ethernet protocols IPv4, TCP, UDP, ARP, ICMP, DHCP, NTP, HTTP, RTSP, IGMP V2, RTP, RTCP
Local video memory Via integrated USB / SD port
Video buffer 64MB RAM ring storage (pre- and post alarm, network failure compensation)
Contact IN / relay OUT 3x IN / 1x OUT
Serial 1x RS485 (full-duplex)
Control protocols Dallmeier DCCP, Pelco D
Control OSD: PTZ controller, at the recorder, via PView
Programming interface Open API for 3rd party systems integration via Dallmeier ActiveX* (ONVIF conform)
Further specifications
Voltage supply 24/28V AC +/- 10% (50/60 Hz), PoE+
PoE conformity IEEE 802.3at
Power consumption DDZ4010-IM/HS/HD: max. 25 W
DDZ4010-SM/HS/HD: max. 25 W
DDZ4010-WM/HS/HD: max. 89 W
Dimensions DDZ4010-IM/HS/HD: approx. Ø 227 x H 248 mm
DDZ4010-SM/HS/HD: approx. Ø 166 x H 244 mm
DDZ4010-WM/HS/HD: approx. Ø 259 x H 330 mm
Weight DDZ4010-IM/HS/HD: approx. 2025 g
DDZ4010-SM/HS/HD: approx. 1755 g
DDZ4010-WM/HS/HD: approx. 4425 g
Operating temperature DDZ4010-IM/HS/HD (indoor): 0°C to +35°C
DDZ4010-SM/HS/HD (indoor): -10°C to +40°C
DDZ4010-WM/HS/HD (outdoor): -30°C to +50°C
Humidity 0% – 90% RH, non-condensing
IP rating IP67 (weather-proof variant)
Approvals/certifications CE, FCC, UL, ACA, UVV-Kassen, CB, DIN EN 50130-4